1 南昌大学物理系, 江西 南昌 330031
2 上海理工大学光电信息与计算机工程学院, 上海 200093
实验研究了低损耗硫系玻璃As2S3光纤的纤芯在532 nm近带隙光照射下的光敏性。实验结果表明,光开始照射时其纤芯的光致折射率变化朝负方向快速减小,然后随着光照时间延长,折射率变化朝正方向缓慢恢复增加。这两个过程经历的时间和折射率变化的大小均取决于光照功率。光照功率增大到一定阈值时,在恢复过程中,光致折射率变化出现正增加,且随光照功率继续增大和曝光时间延长,折射率变化可增加到约3×10
-3。另外,实验初步制备了As2S3光纤的布拉格光栅,曝光期间其中心波长先蓝移,后恢复并红移。同时,实验还发现,在近带隙光照下As2S3光纤出现光阻断效应现象, 其截止效率约为55%。
光纤光学 As2S3硫系玻璃光纤 光致折射率变化 光纤光栅 光阻断效应 中国激光
2018, 45(12): 1206003
Author Affiliations
Abstract
A plasmonic cavity filled with active material is proposed to explain optical switching. Optical properties, including transmission, response time, and field distribution of on/off state, are numerically investigated. We demonstrate that such a gain-assisted plasmonic structure can achieve optical switching in the nanodomain and shorten the switching time to the subpicosecond level. Our results indicate the potential application of the proposed structure in optical communication and photonic integrated circuits.
130.4815 Optical switching devices 240.6680 Surface plasmons 140.3945 Microcavities Chinese Optics Letters
2012, 10(2): 021301
1 南昌大学物理学系, 江西 南昌 330031
2 武汉大学物理科学与技术学院, 湖北 武汉 430072
利用时域有限差分方法(FDTD)研究了由十二重准周期光子晶体(PQ)局部结构组成的复合二维(2D)光子晶体(PC)及其点缺陷的光学特性。结果表明,由于准周期光子晶体局部结构平移对称性缺失,该复合光子晶体可以通过改变缺陷位置来调节缺陷模的特性,由此具有比周期光子晶体更为丰富的缺陷模式及更灵活的调节方式。同时,研究表明,缺陷模频率与所去除介质柱之间的相互影响强弱具有关联性。通过不同点缺陷腔的组合可以进一步获得灵活多样的缺陷模式。
集成光学 复合光子晶体 时域有限差分 缺陷模式
激光干涉条纹中心及半径的检测是光学测量中的关键技术。针对传统的检测方法不能实现高精度、自动化、实时性的缺点,提出了利用数字图像处理技术来提取激光干涉条纹的中心及半径的方法。该方法通过滤波、二值化、细化及亚像素边缘检测等数字图像处理,利用最小二乘法来拟合干涉条纹的中心及半径。实验证明该方法可以检测亚像素级的条纹中心及半径,检测速度快, 基本满足了实际应用中实时高精度的激光干涉测量。
激光干涉条纹 边缘检测 最小二乘法 亚像素 laser interference fringe edge detection the least square method sub-pixel